aberlink-axiom-tooAberlink Axiom TOO

  • Manual CMM with DCC capabilities. DCC mode using CAD files or teach mode.
  • 48”L x 28”W x 18”H
  • Camera system
  • Renishaw MH20i Touch Probe
  • Geometric Thermal Temperature Compensation
  • Machines accuracy is .0029mm + L/250mm

hansford-rapid-checkHansford Rapid Check

  • Manual CMM
  • Retro fit with Quadra-Check 3000 Series Digital readout
  • 48”L x 38”W x H16”
  • Renishaw MIP Touch Probe

brown-sharp-oneBrown Sharp One

  • DCC or Manual CMM
  • PC-DMIS
  • STEP, IGES, or CAD files
  • 38″L x 27″W x 24″H
  • Renishaw PH10T Touch Probe
  • Accuracy .0001

Air Conditioned Inspection Room 16’x37′

  • Three CCM’s
  • Gage pin’s .011, -.750
  • Outside Micrometers 0″-1″ to 29″-30″
  • Specialty Micrometers: Pin, Tub, Blade, Inside, Flange, Depth, Hub & Tesa
  • All Micrometers calibrated on a yearly cycle using standards calibrated by an outside source
  • Vernier’s 0″-6″ to 0″-24″
  • Standard, Metric, Helicoil & Pipe Thread Gages
  • Four Gage Block sets .050 – 4″
  • Dial Bore Gages