Our facility includes the following:
KITAMURA: Model HX-630 i w/ Fanuc 16i-MB CNC
Control Horizontal Machining Center with twin pallets
Full 4th Axis (50 ATC); 35 HP AC motor; Spindle speed 40-12,000 RPM Rapid feed (All Axis) 1968.5 ”per minute
Travels x axis 41.34” y axis 33.46” z axis 35.43”
KITAMURA: Model HMC HX-500G w/ Arumatik-Mi Control
Control Horizontal Machining Center with twin pallets
Full 4th Axis (50 ATC); 40 Taper; 35 HP AC motor; Spindle speed 20-20,000 RPM Rapid feed (All Axis) 2,262”per minute
Travels x axis 34.3” y axis 31.5” z axis 36.6”
KITAMURA: Model HX-400 w/Fanuc 16i-M CNC
Control Horizontal Machining Center with twin pallets
Full 4th Axis (50 ATC ) ; 25 HP AC motor; Spindle speed 40-13,000 RPM Rapid feed (All Axis) 1968.5” per minute
Travels x axis 26” y axis 27” z axis 24”
KITAMURA: Model HX-400 i w/ Fanuc 16i-M CNC
Control Horizontal Machining Center with twin pallets
Full 4th Axis (100 ATC); 25 HP AC motor; Spindle speed 40-13,000 RPM Rapid feed (All Axis) 1968.5 ”per minute
Travels x axis 26” y axis 27” z axis 24”
KITAMURA: Model HMC HX-400G w/ Arumatik-Mi Control
Control Horizontal Machining Center with twin pallets
Full 4th Axis (50 ATC); 40 Taper; 30 HP AC motor; Spindle speed 20-15,000 RPM Rapid feed (All Axis) 2,262”per minute
Travels x axis 24” y axis 24” z axis 24”
KITAMURA: Model HX-300 w/ Fanuc 16i-M CNC
Control Horizontal Machining Center with twin pallets
Full 4th Axis (40 ATC); 20 HP AC motor; Spindle speed 40-15,000 RPM Rapid feed (All Axis) 1968.5 ”per minute
Travels x axis 20” y axis 20” z axis 16”
KITAMURA: Model HX-300 iF w/ Fanuc 16i-M CNC
Control Horizontal Machining Center with twin pallets
Full 4th Axis (40 ATC); 20 HP AC motor; Spindle speed 40-15,000 RPM Rapid feed (All Axis) 1968.5 ”per minute
Travels x axis 20” y axis 20” z axis 20”
LEADWELL: Model MCV 1500i w/ Fanuc 18iTB Control- Cat 50 Taper Machining Center:
rotary (4th) axis w/ 12” Dia. Table w/ 4.13 thru hole; 30 ATC; 35 HP motor; 10,000 RPM max. spindle speed Travels x axis 60” y axis 30” z axis 28.3”
KITAMURA: Model Myceneter 4XD w/ FanucI 0iMD Control Vertical Machining Center
Full 4th Axis Rotary table (30 ATC); Spindle RPM: 12,000 Belt Drive
Rapid Feed (X,Y) 1417 ipm (Z) 1181 imp
Travels x axis 43.31”, y axis 24.02”, z axis 24.02”
SUPERMAX: Model Max-8 Rebel w/ Fanuc Series O-M CNC Control Machining Center; rotary (4th) axis; 24 ATC; 20 HP motor; 8000 RPM max. spindle speed; Travels x axis 65” y axis 30” z axis 30″
DAEWOO: Model Ace-V50 w/ Fanuc Series O-M Control, twin pallet Machining Center;
30-position ATC; 20 HP motor; 25-8000 RPM spindle speed range; Travels x axis 40” y axis 20”
z axis 25.6”
KITAMURA: Model Mycenter 3XG w/Kitamura-Arumatik Mi CNC Control Machining Center;
30 ATC; 15,000 RPM – with 2 Speed Motor
Rapid Feed (X,Y) 1969 ipm, (Z) 1417 ipm
Positioning Accuracy +/- .000078” , Repeatability +/- .000039”
Travels x axis 30”, y axis 18”, z axis 18.1”
Micro Dynamics Tera 50V: Model Micro Dynamics 50V Vertical Machining Center; Renishaw OMP40
40 ATC; 15,000 RPM – with 41 HP Integral Spindle; 104 FT-lbs of torque;
Rapid Feed (X,Y) 2,047 ipm, (Z) 1,889 ipm
Positioning Accuracy +/- 0.0003” , Repeatability +/- 0.0002”
Travels x axis 50, y axis 25”, z axis 25”
Samsung MCV 850: Fanuc Series OiMD-M CNC Control Machining Center;
40 ATC, CAT50; 566 ft./lbs. Spindle torque; 6000 RPM max. spindle speed; Travels x axis 78.75” y axis 33.5”
z axis 31.5”
LEADWELL: Model LTC-40 BL w/ Fanuc OTB Control Turning Center: 12-station turret:
50 HP motor; 15” Chuck, Max. Work Swing- 28.34”, Swing Over Cross Slide- 21.25”, Max. Turning Diameter- 23.62”, “ Z “ Axis Travel- 60”, 4.50” Bar Capacity, and Programmable Quill & Tailstock
LEADWELL: Model LTC-35 w/ Fanuc OiTC Control Turning Center: 12-station turret:
50 HP motor; 15” Chuck, Max. Work Swing- 25.6”, Swing Over Cross Slide-
20.3”, Max. Turning Diameter- 23.5”, “ Z “ Axis Travel- 60”, 4.50” Bar Capacity, and Programmable Quill and Tailstock
LEADWELL: Model LTC-30 CP w/ Fanuc OTB Control Turning Center: 12-station turret:
50 HP motor; 15” Chuck, Max. Work Swing- 25.6”, Swing Over Cross Slide-
20.3”, Max. Turning Diameter- 18.9”, “ Z “ Axis Travel- 40.2”, 4.50” Bar Capacity, and Programmable Quill.
LEADWELL: Model LTC-25 CL w/ Fanuc OiTH Control Turning Center: 12-station turret:
40 HP motor; 12” Chuck, 4” Bar Capacity, and Programmable Quill. “ Z “ Axis Travel- 40.00”.
DAEWOO: Model Puma 8HC w/ Fanuc Series OT Control Turning Center; 12-station turret; 20 HP motor; 19.7 swing-over bed; spindle speed 40-4000 RPM; spindle bore diameter of 2.047”; 630 IPM rapid traverse; fully programmable tailstock.
DAEWOO: Model Puma 10HC w/ Mitsubishi 520 LR Control Turning Center; 10-station turret; 30 HP motor; 19.7” swing-over bed; spindle speed 10-3500 RPM; distance between centers is 20.7”; spindle bore diameter is 3.000”.
DOOSAN LYNX 220 LMA: Model Doosan Lynx 220C w/ Fanuc i Series Control w/ Collet Chuck & 3 Jaw Chuck; 12-station turret (24 indexable); 2″ Bar Capacity; 20.1” swing-over bed; 11.4″ Swing over saddle; 9.8″ Max Turning Diameter; 20.1″ Max Turning Length; 6.9″ “X” Axis Travel; “X’ Axis Rapids 1,181 IPM, “Z” Axis Travel- 21.7″, “Z” Axis Rapids- 1,417; 500IPM Max Feed Rate; A2-5 Spindle Nose; 6,000 Max RPM; 6,000 Max Rotary Tool RPM; Tailstock; Chip Conveyor; Live Milling; Tool Pre-setter; Barfeed Interface; MTA International V-65E Barfeed; Parts Catcher, Mist Bust, Spindle Liners.
CLAUSING KONDIA VERTICAL MANUAL MILLING MACHINE: Model FV1-48VS08;
9” x 48”; Servo Table feed; Newell Topaz 2-Axis DRO System.
HARDINGE CHUCKING MACHINE: Model HCT w/ production threading head.
ACRA ENGINE LATHE: Model 2280LS; 22” swing-over bed; 13” swing-over cross slide;
30-7/8” swing in gap; 80” center distance; 4-1/16” spindle bore; Newell Model DPG2000 2-Axis DRO System.
MITTS & MERRILL NO. 2-HFR KEYSEATER: 12” stroke; 1-1/4” maximum key width;
1-3/4” maximum key depth.
MITTS & MERRILL MODEL K-2024 KEYSEATER: 24” stroke; 2” maximum key width
LAPMASTER: 24” diameter table lapping machine.
DOALL: Model C-305 Series Automatic Production Power Saw; cutting capacity for both round and square – 12”.
MILLER: Model 251 Mig Welder
MILLER: Model 450 Mig Welder
MILLER: Model 250 DX Syncrowave Tig & Stick Welder
BROWN & SHARPE: ONE Shop Floor CMM w/ UMP360 Touch Trigger Controller
Geometric Thermal Temperature Compensation
HANSFORD: Model RCS-4040-18 Coordinate Measuring Machine (CMM) w/ Metronics
Quadra-Check 3000 Series Control; Travels x axis 36” y axis 38” z axis 13”
ABERLINK AXIOM TOO: Manual CMM with DCC capabilities. DCC mode using CAD files or teach mode. 48″ x 28″ x 18″
HEAT TREAT OVEN: M/N HDL5-243636. Maximum temperature 2300 degree Fahrenheit, 480V, Inside dimensions: 27″ high x 36-1/2″ wide x 42-7/8″ deep
GRIEVE: Universal Electric Batch Oven, Model AA-650, Maximum temperature 650 degree Fahrenheit, Inside dimensions: 24″ high x 24″ wide x 24″ deep
MAGNA-FLUX: Magnetic Particle Inspection Machine
MICROMETERS: 0” TO 20” range
0” – 1” Blade Micrometer; 0” – 1” Ball Micrometer; 0” – 1” Hub Micrometer; 3” – 4” Digital Point Micrometer; 0” – 10” Depth Micrometer; .150” – 4.000”
3-Point Hole Micrometer.
DIAL BORE GAUGES: 2.000” – 6.180” range.
ASSORTED BALL GAUGES
GAUGE PINS: .011” – .750” range.
RING GAUGES: .174” – 3.600” range.
JO BLOCKS: 2 standard sets; .050” – .100” – 1.000”
RADIUS GAUGE SET: 1/32” – ½”
MICROMETER STANDARDS: 1” – 19”
THREAD WIRE SET
OPTICAL MAGNIFIED LIGHT
ANGLE BLOCK SET: 1 degree to 30 degree.
THREAD GAUGES: 0-80 to 1-1/8-12 range.
PIPE THREAD GAUGES: 1/8-27 to 2”-11-1/2 range.
HELICOIL THREAD GAUGES: 2-56 to 5/16-24 range.
SELECTION OF METRIC HELI GAUGES
HELI THREAD GAUGES: M2.5 to M12 range.
115 ASSORTED THREAD GAUGES MADE BY J & E INDUSTRIES: both American & metric.
ASSORTED THREAD RING GAUGES
MISCELLANEOUS INSPECTION TOOLS: hardness tester; inspection & geometric tolerance handbook; machinist handbook; surface roughness tester; screw pitch gauges; sine bar set; 3.2.1 blocks; angle plates; V-blocks; digital height gauge; Verniers, range 0-6 to 0-24; telescope hole gauges; protractors; scales; spring calipers; Mastercam computer software; calculators; machine levels; straight edges; squares; feeler gauges.